Crystal Johnson's Journal
Home Page: Crystal Johnson
Morgans Point Resort, TX, USA
| Total Posts: 70 | Latest Post: 2023-03-19 |
| Table of Contents | RSS Feed |
During a Zoom Seminar, John Twist recommended that an in-line fuse be placed between the OD switch and the overdrive solenoid in wiring harness which terminates under the hood.
I took a section of 18 gauge Yellow wire from an old wiring loom and created a fused section with bullet connectors on each end. I like this idea because I could add it to the circuit, or remove it without actually cutting the existing wires.
Note: John Twist's Technical Zoom Seminar #324 dated 5/10/2021 @ around 2 hrs 18 minutes recommended a 10amp fuse.
I took a section of 18 gauge Yellow wire from an old wiring loom and created a fused section with bullet connectors on each end. I like this idea because I could add it to the circuit, or remove it without actually cutting the existing wires.
Note: John Twist's Technical Zoom Seminar #324 dated 5/10/2021 @ around 2 hrs 18 minutes recommended a 10amp fuse.








Want to leave a comment or ask the owner a question?
Sign in or register a new account — it's free