1,450 kg (3,200 lb) – 1,620 kg (3,570 lb) (approx.)
Porsche 928 S4 rear
The Porsche 928 is a luxurygrand tourer produced by Porsche AG of Germany from 1978 to 1995. Originally intended to replace the company's iconic 911, the 928 combined the power, poise, and handling of a sports car with the refinement, comfort, and equipment of a luxury sedan. Porsche executives believed such a flagship would have wider appeal than the compact, quirky and sometimes difficult 911.
The 928 has the distinction of being the company's first production V8 powered model and only coupé powered by a front-mounted V8 engine.
By the late 1960s Porsche had firmly established itself as a manufacturer of high-performance sports cars. Executives, including owner Ferdinand Porsche, were beginning to consider adding a luxury touring car to the line-up. Managing director Ernst Fuhrmann was pressuring Ferdinand to approve development of the new model due to concerns that the then-current flagship model, the 911, was reaching the limits of its potential. Slumping sales of the 911 seemed to confirm that the model was approaching the end of its economic life cycle. Fuhrmann envisioned the new range-topping gran turismo model as being the best possible combination of a sports coupé and a luxury sedan. This would set it apart from the 911, had a relatively spartan interior and true sports car performance.
Early Porsche 928
Ordered by Ferdinand Porsche to design a production-feasible concept for the new model, Fuhrmann initiated a design study in 1971, eventually yielding the 928. Several drivetrain layouts were considered during early development, including rear and mid-engined designs, but most were dismissed because of technical and legislative difficulties. Having the engine, transmission, catalytic converter(s) and exhaust all cramped into a small rear engine bay made emission and noise control difficult, problems Porsche had with the 911. After deciding that the mid-engine layout did not allow enough room in the passenger compartment, a front-engine, rear-wheel drive layout was chosen. Porsche may have feared that the U.S. government would soon ban the sale of rear-engined cars in response to concern over safety problems with the rear-engined Chevrolet Corvair.
Porsche engineers wanted a large-displacement engine to power the 928, and prototype units were built with a 5-litre V8 producing nearly 300 hp (220 kW). Ferdinand Piëch wanted this car to use a 4.6-litre V10 with 88 mm bore spacing based upon Audi's five-cylinder engine. The five-cylinder unit is a derivative of the Volkswagen Golf EA827 engine, essentially an inline-four with another cylinder added. Several members of the Porsche board objected, chiefly because they wanted Porsche AG to maintain some separation from Volkswagen.
The resulting M28 engine has multiple unusual features. Its bore spacing is 122 mm, almost exactly the same size as a Chrysler 426 hemi or a big block Chevrolet engine. This engine uses thick aluminum cylinder barrels, hence the lower displacement. The engine was designed for air flow first, thus the spark plugs are located at the top of the head. The four-bolt bearings are sizeable, and are fed oil via grooves in the bottom surface of the block. The oil and water pumps are driven by the timing belt, and the design of the engine allows for sufficient air flow with a low hood.
The first two running prototypes of Porsche's M28 V8 used one four-barrel carburetor for initial testing. The cars were sold with the planned Bosch K-Jetronic fuel injection system. When increasing concern within the company over price and availability of fuel during the oil crisis of the 1970s became an issue of contention, smaller engines were considered in the interest of fuel economy. A push began for the development of a 3.3 L 180 hp (130 kW) powerplant they had designs for, but company engineers balked at this suggestion. Both sides finally settled on a 4.5 L, SOHC per bank 16-valve V8 producing 240 PS (180 kW; 240 hp) (219 hp (163 kW) in North America), which they considered to have an acceptable compromise of performance and fuel economy.
The finished car debuted at the 1977 Geneva Motor Show before going on sale later that year as a 1978 model. Although it won early acclaim for its comfort and power, sales were slow. Base prices were much higher than that of the previous range-topping 911 model and the 928's front-engined, water-cooled design alienated many Porsche purists.
Fuhrmann's replacement, Peter Schutz, decided that the models should be sold side by side, feeling that the 911 still had potential in the company's line-up. Legislation against rear-engined vehicles did not materialize. Although it never sold in the numbers Fuhrmann envisioned, the 928 developed an avid following and had an 18 year production run.
The 928 featured a large, front-mounted and water-cooled V8 engine driving the rear wheels. Originally displacing 4.5 L and featuring a single overhead camshaft design, it produced 219 hp (163 kW/222 PS) for the North American market and 237 hp (176 kW/240 PS) in other markets. Porsche upgraded the engine from mechanical to electronic fuel injection in 1980 for US models, although power remained the same. This design marked a major change in direction for Porsche (started with the introduction of the Porsche 924 in 1976), whose cars had until then used only rear- or mid-mounted air-cooledflat engines with four or six cylinders.
Porsche utilized a transaxle in the 928 to help achieve 50/50 front/rear weight distribution, aiding the car's balance. Although it weighed more than the difficult-to-handle 911, its more neutral weight balance and higher power output gave it similar performance on the track. The 928 was regarded as the more relaxing car to drive at the time. It came with either a five-speed dog leg manual transmission, or a Mercedes-Benz-derived automatic transmission, originally with three speeds, with four-speed from 1983 in North America and 1984 in other markets. More than 80% had the automatic transmission. Exact percentage of manual gearbox cars for entire production run is not known but it is believed to be between 15 and 20%.
The body, styled by Wolfgang Möbius under guidance of Anatole Lapine, was mainly galvanized steel, but the doors, front fenders, and hood were aluminum in order to make the car more lightweight. It had a substantial luggage area accessed via a large hatchback. The new polyurethane elastic bumpers were integrated into the nose and tail and covered in body-coloured plastic; an unusual feature for the time that aided the car visually and reduced its drag. Porsche opted not to offer a convertible variant but several aftermarket modifiers offered convertible conversions, most notably Carelli, based in Orange County, CA. The Carelli conversions were sold as complete cars, with the conversion doubling the price of the car. A reported 12 units were made.
The 928 qualified as a 2+2, having two small seats in the rear. Both rear seats could be folded down to enlarge the luggage area, and both the front and rear seats had sun visors for occupants. The rear seats are small (due to the prominent transmission hump) and have very little leg room; they are only suitable for adults on very short trips or children. The 928 was also the first vehicle in which the instrument cluster moved along with the adjustable steering wheel in order to maintain maximum instrument visibility.
The 928 included several other innovations such as the "Weissach Axle", a simple rear-wheel steering system that provides passive rear-wheel steering to increase stability while braking during a turn, and an unsleeved, silicon alloy engine block made of aluminum, which reduced weight and provided a highly durable cylinder bore.
Styling was the same in both 1978 and 1979, with the body lacking both front and rear spoilers. From 1980 (1983 in North America) through 1986, front and rear spoilers were present on "S" models, rear spoilers being integrated into the hatch. From 1987 through 1995, the front spoiler is integrated into the nose and the rear spoiler became a separated wing rather than an integrated piece, and side skirts were added. The rear tail-light configuration was also different from previous versions. GTS models had wider rear fenders added to give more room for 9" wide wheels. Another easily noticeable visual difference between versions is the style of the wheels. Early 928s had 15" or 16" "phone dial"-style wheels, while most 1980s 928s had 16" slotted "flat discs", CSs, SEs and 1989 GTs had 16" "Club Sport" wheels, later GTs had 16" "Design 90" style wheels which were also option on same period S4s, the GTS used two variations of the 17" "CUP" wheels.
Porsche introduced a refreshed 928 S into the European market in 1980 model year, although it was summer of 1982 and MY 1983 before the model reached North America. Externally, the S wore new front and rear spoilers and sported wider wheels and tires than the older variant, but the main change for the 928 S was under the hood, where a revised 4.7 L engine was used. European versions debuted with 300 PS (221 kW/297 hp), and were upgraded to 310 PS (228 kW/306 hp) for 1984 model year, though it is rumored [and proven on chassis dynamometers] that they typically made around 330 hp. From 1984 to 1986, the S model was called S2 in UK. These cars used Bosch LH-Jetronic fuel injection and purely electronic Bosch ignition, the same systems used on the later 32-valve cars, though without the pollution controls. North American-spec 1983 and 1984 S models used, among other differences, smaller valves, milder camshafts, smaller diameter intake manifolds, and additional pollution equipment in order to meet emissions regulations, and were limited to 234 hp (174 kW/230 PS) as a result. Due to low grade fuel 16V low compression S engine was made for Australian market in 1985 model year. It had 9.3:1 compression ratio pistons instead of normal 10.4:1 but used same large intake, high lift cams, large valves etc. of other S engines.
As the faster European model was not available in the United States and Canada during the first three years of its existence, a "Competition Group" option was created to allow North American customers to have an S model lookalike with spoilers, 16" flat disc wheels, sport seats, sport springs and Bilstein shocks. Customers could specify paint and interior colors the same way as on a normal 928. Two cars were made in late 1980 model year for U.S. with this option. The package was officially available in 1981 and 1982 model years and was canceled in 1983 when the S model became available for these markets. Many cars have had S model features added by subsequent owners, making original "Competition Group" cars difficult to distinguish without checking option codes.
In 1982 model year, two special models were available for different markets. 202 "Weissach Edition" cars were sold in North America. Unusual features were champagne gold metallic paint, matching brushed gold flat disc wheels, two-tone leather interior, a plaque containing the production number on the dash and the extremely collectible three-piece Porsche luggage set. It's believed these cars were not made with S spoilers even though these were available in U.S. during this time period as part of the "Competition Group" option. The "Weissach Edition" option was also available for the US market 911 in 1980 model year and 924 in 1981 model year.
141 special "50th Jubilee" 928 S models were available outside the U.S. and Canada to celebrate the company's 50-year existence as a car manufacturer. This model is also sometimes referred to as the "Ferry Porsche Edition" because his signature was embroidered into the front seats. It was painted meteor metallic and fitted with flat disc wheels, wine red leather and special striped fabric seat centers. Similar 911 and 924 specials were also made for world markets.
Porsche updated the North American 928 S for 1985, replacing the 4.7 L SOHC engine with a new 5.0 L DOHC unit sporting four valves per cylinder and producing 288 hp (215 kW/292 PS). Seats were also updated to a new style, these cars are sometimes unofficially called S3 to distinguish them from 16-valve "S" models. European models kept a 4.7 L engine, which was somewhat more powerful as standard, though lower 9.3:1 compression 32-valve engine together with catalytic converters became an option in some European countries and Australia for 1986. In 1986, revised suspension settings, larger brakes with 4-piston calipers and modified exhaust was installed on the 928S, marking the final changes to old body style cars. These were straight from the 928S4, which was slated to debut a few months later. These changes came starting from VIN 1001, which means that the first thousand '86's had the old brakes, but later cars had the later systems. This later 1986 model is sometimes referred to as a 19861⁄2 or 1986.5 because of these changes. The name is a little misleading as more than 3/4 of the 1986 production had these updates.
The 928 S4 variant debuted in the second half of 1986 as a 1987 model, an updated version of the 5.0 L V8 for all markets producing 320 PS (235 kW/316 hp), sporting a new single-disc clutch in manualgearbox cars, larger torque converter in automatics and fairly significant styling updates which gave the car a cleaner, sleeker look. S4 was much closer to being a truly world car than previous models as only major differences for North American models were instrumentation in either kilometers or miles, lighting, front and rear bumper shocks and the availability of catalytic converters in many other markets. The Australian market version was only one with different horsepower rating at 300 PS (221 kW/296 hp) due to preparation for possible low grade fuel. Even this was achieved without engine changes.
A Club Sport variant which was up to 100 kg (220 lb) lighter became available to continental Europe and U.S. in 1988. This model was watered down version of the 1987 factory prototype which had a lightened body. Also in 1987 the factory made four white lightened manual gearbox S4 models for racecar drivers who were on their payroll at the time. These were close to same as later actual Club Sport models and can also be considered prototypes for it. An SE (sometimes called the S4 Sport due to model designation on rear bumper), a sort of halfway point between a normally equipped S4 and the more race-oriented Club Sport, became available to the UK. It's generally believed these Porsche Motorsport-engined cars have more hp than the S4. They utilize parts which later became known as GT pistons, cams and engine ECU programs. Some of them had stronger, short geared manual gearbox. The automatic gearbox was not available.
For the 1989 model year, a visible change inside was digital trip computer in dashboard. At the same time Australian models received the same 320 PS (235 kW/316 hp) engine management setup as other markets. Porsche debuted the 928 GT in the late winter 1988/89 after dropping the slowly selling CS and SE. In terms of equipment, the GT was like the 928 SE, having more equipment than a Club Sport model but less than a 928 S4 to keep the weight down somewhat. It had the ZF 40% limited-slip differential as standard like the Club Sport and SE before it. Also like the CS and SE, the GT was only available with a manual gearbox. European 1989 CS and GT wheels had an RDK tire pressure monitoring system as standard, which was also optional for the same year S4. For 1990 model year Porsche made RDK and a 0-100% variable ratio limited-slip called PSD (Porsche SperrDifferential) standard in both GT and S4 models for all markets. This system is much like the one from the 959 and gives the vehicle even more grip. In 1990 the S4 was no longer available with a manual gearbox.
The S4 and GT variants were both cut at the end of 1991 model year, making way for the final version of the 928. The 928 GTS came for sale in late 1991 as a 1992 model in Europe and in spring of 1992 as an early 1993 model in North America. Changed bodywork, larger front brakes and a new, more powerful 5.4 L, 350 PS (257 kW/345 hp) engine were the big advertised changes; what Porsche wasn't advertising was the price. Loaded GTS models could eclipse US$100,000 in 1995, making them among the most expensive cars on the road at the time. This severely hampered sales despite the model's high competency and long standard equipment list. Porsche discontinued the GTS model that year after shipping only 77 of them to the United States. Total worldwide production for all years was a little over 61,000 cars.
Second-hand models' value decreased as a result of high maintenance costs due to spare parts that are expensive to manufacture. Many parts suppliers and enthusiast networks exist, especially in the United States, Germany and UK.
With the release of the CayenneSUV, Porsche has met with renewed success with a front-engined, V8-powered model. The company's 2005 announcement that a new V8-powered 4-door grand tourer model called Panamera would be launched in 2009 fueled rumors and fan speculation of a reborn 928. Although the Panamera will be a 4-door model, Road and Track magazine published a speculative piece in their April 2006 issue regarding the possibility of a new, 928-esque coupé that may debut on a shortened version of the Panamera's platform sometime around 2011 or 2012 model year. As of January 2017, no announcement has been made by Porsche that could add credibility to this speculation.
New 5.0 liter 32-valve Bosch LH-Jetronic injection and Bosch EZF ignition 288 hp engine for US market.
Top speed (US model) is now in excess of 250 km/h (155 mph).
Special two-valve 4.7 L engine (9.3:1 c/r) option M151 for Australia. Compression change was done with different shape piston tops. Coupled only with automatic transmission. Engine number is same M28/22 as the high-compression 2-valve engines.
LH-Jetronic control box design changed in international markets.
New style front seats. Redesigned more modern looking door panels when multi speaker stereo was ordered.
Gearbox synchromesh changed to Borg Warner design and shorter gear lever, improving driveability on manual transmission cars.
Shims left out from front end of torque tube drive plate in automatic cars, this sometimes cause engine thrust bearing failures.
Radio antenna moved to embedded windshield wire.
Model designation: 928 S / 928 S2 (UK)
Engine displacement: 4.7 L (286 CID) / 5.0 L (302 CID) (North America, optional elsewhere)
Valves: Two per cylinder (four for North America, optional elsewhere)
Different style pistons, cylinder heads, camshafts, intake and larger intake valves compared to earlier 5.0 L engines.
Nominal static compression ratio 10.0:1 (True ratio between 9.4:1 and 10.0:1, depending on parts used).
Cylinder head studs used in all earlier engines replaces with bolts making it easier to remove heads while engine is in engine bay.
Updated LH-Jetronic injection and ignition changed to EZK system, two knock sensors added to engine. Single disk clutch on manual transmission cars, larger torque converter on automatics.
Modified front brake calipers into use with 2 mm diameter increase for large piston. Cars sold to U.S., Canada, Australia and Arab countries got new parts once remaining old design caliper stock was used up.
New style front & rear bumpers and rear wing spoiler.
Older style S wing still available as option M471. This is same option number as 1980-82 Competition Group. Porsche has used same numbers several times in different model years and models. In different years they can mean different things.
Redesigned front and rear bumper light assemblies.
Body changed compared to earlier models to accommodate larger rear lamps, rear seat area modified to give room for new torque converter.
Upwards folding rear spoiler and piston oil squirters in engine block on early cars only.
Different horsepower rating for Australia due to different ignition map used because of possible low grade fuel.
Model designation: 928 S4 / 928 CS / 928 SE (UK)
Engine displacement: 5.0 L
Valves: Four per cylinder
Power: 320 PS (316 hp, 236 kW) (S4, CS and SE) / 300 PS (296 hp, 221 kW) (S4) for Australia
Lighter 928 CS "Club Sport" version available in Continental Europe and USA, 928 SE (S4 Sport) in UK.
Only model year for "CS" (USA) and "SE" (UK). "CS" uses different VIN sequence than normal "S4".
Stronger torque tube with 3 mm thicker center shaft for automatic transmission.
Pistons with strengthened skirt into use in February 1988.
Oil drainage improved in piston skirts.
Model designation: 928 S4 / 928 CS / 928 GT (no "CS" model in USA)
Improvements to cooling in exhaust side at cylinder heads, steering rack, power steering pump, soundproofing, front cooling flaps deleted, new style shift knob with integrated leather booth in manual gearbox cars, etc.
Temperature sensors for ignition circuit monitor system moved from #4 and #8 cylinders to #3 and #7 cylinders to improve their efficiency.
Check engine warning light added to all US models due to California regulatory demands.
Two airbags as standard in LHD models during model year production for most markets.
Model designation: 928 GTS
Engine displacement: 5.4 L
Valves: Four per cylinder
Power: 350 PS (345 hp, 257 kW)
Engine displacement increases to 5.4 L due to increased crankshaft stroke. Piston compression height adjusted to matched new stroke.
10.4:1 compression ratio pistons
Milder camshafts for emission purposes
Bodywork updated with flared rear fenders and so-called "cup" mirrors.
"Big Black" front brakes, significantly larger than "S4" version.
Stronger manual gearbox with differential driven oil pump and front-mounted oil cooler.
GTS became available in North America at January 1992 as early 1993 model with later model year VIN. These cars use same parts as 1992 models and can be differentiated from true 1993 US models with separate VIN sequence and option code M718.
Model designation: 928 GTS
Engine displacement: 5.4 L
Valves: Four per cylinder
Power: 350 PS (345 hp, 257 kW)
Cylinder block lower half studs replaced with bolts.
Engine piston rings changed to limit oil consumption and pistons changed to strengthen skirt area.
Minor update to gearbox clutch.
Air conditioner refrigerant changed to R-134a.
Driver side airbag standard in RHD cars, passenger side airbag not available in them.
Model designation: 928 GTS
Engine displacement: 5.4 L
Valves: Four per cylinder
Power: 350 PS (345 hp, 257 kW)
Cabin pollen filter added.
Dynamic kickdown for automatic transmission models.
Wheel design changed to "Cup II", RDK deleted at same time.
First 19 US models were made already in spring of 1993, months before when normal model year change occurs in July/August. These M718 option cars still used previous model year parts like Cup I wheels and do not have 1994 model year updates despite using same 1994 VIN sequence.
1) Count contains 2 1980, 458 1981 and 1084 1982 US "Competition Group" models made. 2) Count contains 202 US "Weissach edition" models made in 1982 model year. 205 is official number which don't seem to be correct. Cars with higher production number than 202 or 205 exist. 217 is known existing plaque number but there were only 202 cars made with M462 option code. 3) Count contains 141 European "50th Jubilee" models made in 1982 model year. 4) Count contains 44 M151 low compression 16V 4.7L S engine models made in 1985 model year for Australian market. 5) Count contains 2219 so-called S3 US models made in 1985 model year and 877 1986 models made in early part of 1986 model year up to November 1985. 6) Count contains 517 1986 European 32-valve S models. Most were Australian and Japanese models. 266 were optional M298/M299 catalytic converter models sold in Germany, Switzerland and Austria. 7) Count contains 2071 so-called S3.5 US models made in later part of 1986 model year starting from November 1985. 8) Count contains 6 Club Sport prototypes made in 1987 model year. 9) Count contains 10 European models and 2 US models made in 1988 model year and 7 European models made in early part of 1989 model year. Last Club Sport cars were made in early winter 1988/89. 10) Count contains 358 European and 115 US/CDN model made in 1989 model year, 808 European and 142 US made in 1990, 516 European and 145 US made in 1991 resulting 1682 European and 396 US model made over two and half year time period. GT production started in around February 1989. 11) Count contains 955 1992, 621 1993, 523 1994 and 399 1995 European models resulting 2498 cars made. Count contains 88 early VIN 1993, 102 late VIN 1993, 19 + 120 1994 and 77 1995 US models resulting 406 cars made.
The Porsche 942 was a special edition 928 presented by the company as a gift to Ferry Porsche on his 75th birthday in 1984. Its also known by name 928-4, 928S. It featured 10 in (254 mm) longer wheelbase than normal 928 production model, including an extended roof above the rear seats to better accommodate tall passengers, at the time very advanced projector headlights, the 5 liter 32-valve engine before it was introduced in US market, and S4 front and rear bumpers two years before they entered production.
"Study H50" Four-door 928 based prototype
H50 Four-door 928
Three years later, in 1987, the lengthened 928 that had been presented to the company's founder on his 75th birthday turned up as a "Feasibility Study", now with a second (rather narrow) set of doors, apparently opening in the same way as the suicide doors seen on the later Mazda RX-8. At the time "Study H50" appeared to sink with little trace, but two decades later, with the launch of the larger four-door Porsche Panamerasaloon, the 928 based four-door saloonprototype from 1987 acquired greater significance.
Porsche's Racing Department never officially entered or prepared a racing 928 for a pure works entry. Only once Porsche decided to make it obvious to the 911 enthusiasts that they usually tended to underrate the racing genes of the 928. Porsche then "arranged" this 928GTR to compete against the then dominant 911(993GTR) on the race track. In order not to offend sensibilities of their traditional 911/993GTR customers by officially challenging them with an outright Works - 928GTR, Porsche asked Max Moritz Racing, their longtime private racing partner from next door Reutlingen to enter this 928GTR Cup as a 'semi-works' car.
It didn't come as a surprise that the drivers were: Bernd Mayländer, Manuel Reuter (Porsche works pilots), also Harm Lagaay (then Head of Porsche's Design Studio). Vittorio Strosek sponsored MM with his Lightweight-Body-Parts and racing exhaust. The car was officially entered by Porsche-Club-Schwaben. Homologation minimum weight had to be, and actually is 1,370 kg (3,020 lb).
Lagaay reports that the car was very competitive and able to hold most 964 CUP GTs down, although the engine was no more than fine-tuned after having been chosen from a set of high power output specimen in Weissach. In the last race of the season at Hockenheim a crank-bearing ran dry. As the car was supposed to race in 1995 as well, it was made ready to continue its successful competition in the 1995 season. A fresh engine was installed, selected from the same lot of high output engines and tuned as before. In 1995 Porsche's 928 production came to an end, and the car consequently was not raced in the new season.
The late Max Moritz himself then added the car to his collection of historic vehicles. It was not put on the road again until after his death, when the family sold the car in October 2004 - with only 24500 km on the clock ( ).
For the 1984 24 hours of Daytona, Porsche sent one of its experimental "All-aluminum" 928S to the Brumos Racing Team to be prepared with specific instruction not to modify the car in any way. Porsche wanted to promote the performance of the 928 to North America. The drivers Richard Attwood (GB), Vic Elford (GB), Howard Meister (USA) and Bob Hagestad (USA) were told to just "drive the car". During practice for the 24-hour race the drivers found the car to be somewhat unstable on the high banks of Daytona and wanted to add a rear wing to the car; Porsche denied the request. The Brumos team tinkered with the suspension set up to make the car more stable. The car finished in 15th overall and 4th in the GTO class. One driver stated in an interview later on, that were it not for a lengthy pit stop to fix some body damage, they would have finished in the top 5 overall. The car was then returned to Porsche and is now in the Porsche Museum.
A 928S from Raymond Boutinaud also competed at the 24 Hours of Le Mans in 1983 & 1984 with a 22nd-place finish in 1984. The same car also competed in 1000k races at Spa, Brands Hatch and Silverstone in 1984, but with little success. It has been rumored that the Raymond Boutinaud 928S was also an "all-aluminum" car from Porsche but that has been unfounded.
On August 7, 1986 American racing driver Al Holbert set a speed record at Bonneville in a pre-production 928 S4. This 928 would turn 171.110 mph in the flying mile and 171.926 mph for the flying kilometer. In March 1986, the same car reportedly did 180+ mph at Nardo, but the Bonneville run netted United States Auto Club official record "at the time" for International Category A, Group 2, Class 9, for normally aspirated vehicles. That made 1987’s 928 S4 the fastest non-turbocharged production car in the world.
On September 15, 2011 at the Bonneville Salt Flats, racing driver and owner of 928 Motorsports, LLC. Carl Fausett set the current world record as the fastest Porsche 928 in recorded history. The record setting run was clocked by the Utah Salt Flats Racing Association at 216.63537 mph. The car was a 900 BHP supercharged 6.54 liter 32 valve 928 specially built for the land speed record attempt. dubbed by 928 Motorsports as the "Rekordwagen", which raced in the class Blown Gas Modified Sports B/BGMS.
The Pikes Peak International Hill Climb is the second oldest auto race in the U.S.; a 12.42 mile (19.99 km) course with 156 turns starting at 9390 ft and ending at the 14110 foot summit of Pikes Peak. In 2007, 2008 and 2009 American racing driver Carl Fausett took his specially prepared and supercharged 1978 Porsche 928 to the Pikes Peak International Hill Climb and competed in the Open Division. Fausett placed third in the Open Division in both 2007 and again in 2009, where he was also the fastest 2WD car. At that time, much of the race course was gravel. Today the entire Pikes Peak Highway has been paved.
^Rombauts, Walter, ed. (1979-09-15). "Salon van Frankfurt is aanklacht tegen politieke machthebbers" [Frankfurt Show is an indictment of political leaders]. Keesings Auto Magazine (in Flemish). Antwerp, Belgium. 2 (17): 18.CS1 maint: Unrecognized language (link)