'BRG' 1300 Sprint Engine Project

Mon, 19 Feb 2018 04:01:09 -0600

Larry Mundell's Journal --

19/2/2018 Have collected most parts I require - 2 Webers & inlets, extractors, HD radiator, bearings etc Crank ground +.10 & extra flywheel bolts 20th oversize pistons, Started porting head - large inlet valves next Cam Moss Fast Road 89 Overall target budget - max AUS$10,000 spent half already with lots of machining to go. Have poly bushes & HD 330lb front springs ready to fit - also oil cooler & catch tank Have assembled the engine with twin webers and extractors - all ready to be install in the car over summer

<thumbnail 20181011 160003>

Posted 2018-02-19 04:01:09 by Larry Mundell

Heavy Duty Wheel Studs

Mon, 19 Feb 2018 03:49:23 -0600

Larry Mundell's Journal --

19/2/2018 In the process of fitting Freelander wheel studs to 'Yellow' - twice as long. twice as strong. AUS$88 well worth it as I run 14 x 6in alloys Old stud were stretched in the middle. Note there are 3 styles of Freelander stud under the same part number & they are different - Google & check pictures Next major job - check damage after thrust bearings fell out

Posted 2018-02-19 03:49:23 by Larry Mundell